| Manufacturer |
|---|
| ATEN TECHNOLOGY | | | | Man. Part Number |
|---|
| IC485SN |
| Description |
|---|
| The IC-485S and IC-485SN represent hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. |
| Primary Information | | Networking Type | Serial adapter | | Form Factor | External | | Data Transfer Rate | 100 Kbps | | Connectivity Technology | Wired | | Interfaces | 1 x serial - RS-232/422 - RJ-11 - 1 ;1 x serial - RS-232/422 - bare wire - 4 | | Connections | 1 x serial - RS-232 - 25 pin D-Sub (DB-25) | | Data Link Protocol | Serial | | Networking / Compliant Standards | Serial RS-232 | | Width | 2.1 Inch | | Depth | 2.9 Inch | | Height | 0.7 Inch | |
| Serial adapter - RS-232 - serial - serial | |
The IC-485S and IC-485SN represent hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration.
|
