Manufacturer
ATEN TECHNOLOGY
Man. Part Number
PN9108U

Description

The PN9108U, Power Over the Net, is a control unit that provides remote power management for eight AC outlets via a HTTP/TCP/IP or local RS-232 connection. The PN9108U provides administrators the ability to control the power off, power on, and reboot status for each attached device from any computer connected to the Internet, whether down the hall, or half way around the world. The power status of each outlet can be set individually, allowing users to establish on/off/reboot schedules for each device. Up to 15 additional PN9108U stations can be daisy chained down from the original PN9108U, providing remote power management for up to 128 devices. Installation and operation is fast and easy: plugging cables into their appropriate ports and simple GUI management is all that is entailed. The PN9108U's firmware is upgradeable over the Net. With its advanced features and ease of operation, the PN9108U is the most convenient, most reliable, and most cost effective way to remotely manage power access for multiple computer installations.

Primary Information Power Device Type  Power control unit  Voltage Provided  100 - 120V / 220 - 240V  Voltage Required  100 - 120V / 220 - 240V  Interfaces & Connections  1 x management - RS-232 - 9 pin D-Sub (DB-9) ;1 x management - Ethernet 10Base-T/100Base-TX - RJ-45 ;2 x network stack device - RS-232 - 9 pin D-Sub (DB-9) ;8 x management - RJ-11  Input Connector(s)  1 x IEC 60320/C14 (M)  Output Connector(s)  8 x IEC 60320/C13 (F)  Width  43.2 Cm  Depth  24.9 Cm  Height  4.45 Cm  Features  Remote power on/off/reboot control for eight outlets via TCP/IP and a built in 10/100 Ethernet port

POWER OVER THE NET, IS A CONTROL UNIT THAT PROVIDES REMOTE POWER MANAGEMENT FOR EIGHT AC OUTLETS VIA A HTTP/TCP/IP OR LOCAL RS-232 CONNECTION